Hello, thanks for checking this article. I will take some weeks to introduce our main products for you. At the first week, i wanna talk about our main hottest product: Fire sleeve. Fire sleeve is constructed from high bulk glass fiber sleeve coated with silicone rubber. Fire sleeve also called other names in various uses, such as pyrojacket, firejacket . Fire sleeve protects continuously to 500℉(260℃) and will withstand molten splash at 2200℉(1200℃). Different color available in red, black, blue, grey. Usage: Excellent modulus of elasticity makes it an excellent choice for bundling hoses, tubes, pipes and cables in a variety of hostile environments. Function: Non-flammable, self-extinguishing, insulation. How to choose the size:  We make the inner diameter from 6mm to 152mm, you can measure the outside diameter of your hose and add approximately 1/4”, that’s the size will meet your needs. Custom service: We can also provide label printing service on the product. Just send us your logo picture, we will make mold and printing on the sleeve. Special bulk packaging to maximize productivity, minimize waste as you request. To provide more convenient installation, we make fire sleeve with velcro, then you don't need to move your pipe or cable during installation, you can find the installation method in the attached video. As we talked before, the fire sleeve is constructed from high bulk glass fiber sleeve coated with silicone rubber. We also make braided fiberglass sleeve without silicone rubber, which means it is only braided by high quality fiberglass, it’s highly flexible and conformable. The thickness is available with 1mm, 1.5mm, 3mm. The diameter we make from 1mm to 152mm, Specific workmanship and manufacturing method can be produced according to customer requirements. Thanks for the reviewing again. Next week i will introduce the abrasion resistance sleeve, looking forward to your attention.

Black titanium exhaust wrap in trial production. We hope to officially produce it as soon as possible. Product info -Black carbon fiber look -More flexible, secures tightly -Withstands 1800°F direct heat -Reduce underhood temps -Many sizes and packaging option -No burrs, beautiful appearance

TEMPGUARD is a manufacturer for different automotive heat shield products, we are profesional heat control factory more than 10 years. The turbo blanket heat shield isolates the heat produced by your turbocharger, and prevents that heat from damaging, or even igniting, components surrounding the turbocharger within your engine compartment, such as plastic and rubber hoses and electrical wiring, as well as painted surfaces, such as the engine bay and the surface of the hood. Also, it prevents areas of localized high temperature from damaging the engine itself. In keeping the exhaust gases within the turbocharger hot, turbocharger efficiency is improved. As you may know, the hotter a gas is, the more expansive it is. Within a contained system of a specified size, the more expansive a gas is, the greater the pressure derived and thus, the greater the flow of gas to escape the containment. With this increased pressure and flow rate for a given engine RPM, the acceleration of the turbocharger's impeller is increased as compared to the same turbocharger with the engine at the same RPM but with cooler exhaust gases. This equates to faster spool up of the turbocharger, as well as greater attainable levels of boost. What a driver will experience with a turbo blanket is greater turbocharger responsiveness. The faster spool up of the turbocharger means less turbo lag and a more linear power curve.   As you may know, it is very important to keep engine intake air cool. This is why intercoolers are often utilized with turbochargers. Similar to above, the cooler a gas is (such as intake air), the more dense it is. The more dense the intake air, the more oxygen it contains per unit volume. The more oxygen reaches the engine, the more power can be obtained. In keeping the heat of the exhaust gases contained within the hot side of the turbocharger and away from the cool side of the turbocharger and the intake path, more oxygen per unit volume reaches the engine, and thus, more power.

Self wrapped aluminized foil glass fiber sleeve is made of aluminum foil, fiberglass and polyester. It has excellent heat insulation, anti-radiation and high temperature resistance, oil resistance, corrosion resistance.

Heat Shrink-ability Thermal shrinkage ratio: 2:1 The wall thickness of braided pipe after full shrinkage is about 1.0 mm Longitudinal change after complete contraction: - 10 ~ - 20% Temperature Grade Operating temperature range (3000 hours): - 40 ℃ ~ 125 ℃ Service temperature range (1000 hours): - 40 ℃ ~ 150 ℃ Minimum shrinkage temperature: 110 ℃ Recommended shrinkage temperature: 120 ℃ ~ 150 ℃ Maximum storage temperature: 50 ℃ Materials Warp material: polyester multifilament Latitudinal material: irradiation crosslinking, modified polyolefin (PE-7042) Coating material: modified polyolefin Basic performance Performance TEST RESULT Wear resistance: (200g load, 0.3mm metal knife edge, 10Hz, 10min stroke, 144000 cycles) 23℃ The protected rubber pipe fittings are not worn 80℃ The protected rubber pipe fittings are not worn 125℃ The protected rubber pipe fittings are not worn Thermal aging property 168小时，125 ℃ The wear resistance is not weakened at 23 ℃ 24小时，150 ℃ The wear resistance is not weakened at 23 ℃ Flame retardancy MVSS 302 Uncracked Low temperature flexibility -40℃ 4 hours Uncracked Solvent resistance: 1. Antifreeze (50% glycol) 2. Engine oil (SAE 10W / 30) 3. Mineral hydraulic fluid 4. Detergent (1% active agent) 5. Brake oil (DOT 4) 6. Unleaded gasoline 7. Diesel oil Soak at 23 ℃ for 24 hours The wear resistance is not weakened at 23 ℃