BSTFLEX make a wide range of Exhaust Lagging and Heat Shields. Exhaust lagging wraps can reduce radiant heat damage and keep operations and vehicles functioning smoothly. The exhaust lagging and tape is suitable for insulating high temperature surfaces in your engine room, including dry exhaust pipes, exhaust manifolds and hot water pipes. Here we tell you something about the exhaust lagging, Fiberglass exhaust lagging wrap, 500°C Maximum Aluminum fiberglass exhaust lagging, 500°C Maximum Thick fiberglass exhaust lagging insulation,  500°C Maximum Ceramic exhaust lagging tape, 1000°C Maximum Aluminum ceramic lagging tape, 1000°C Maximum Thick ceramic exhaust lagging insulation, 1000°C Maximum We have more other materials please visit our website or contact us. Exhaust lagging wraps are an easy in-theater solution to quickly fix exhaust heat related issues. Reduces up to 50% of exhaust pipe heat Easy to install – simply wrap around pipe Fasten with clamp, wires, or stainless-steel locking tie More Exhaust Lagging and Heat Shields please contact us, we are professional for exhaust insulation products.

We provide different flexible metal hose high temperature protection sleeves and blankets. Flexible metal Hose range includes flexible exhaust, interlock, braided stainless Steel hose assemblies, unbraided corrugated hose, stainless steel conduit, cable armour, stainless steel expansion bellows, vibration eliminators for the refrigeration industry and any other flexible metallic assemblies required. Flexible metal hose Fire sleeve , made by silicone and fiberglass, thickness 3-5 mm. Resistant temperature continuously up to 500°F (260°C) along with resistance to direct flame and molten splashes up to 2200°F (1200°C). Flexible metal hose Fiberglass sleeve , made by pure glass fiber, thickness 3 mm, resistant 260-550 degree C for long time. Flexible metal hose Basalt sleeve , made by basalt fiber, thickness 3 mm, resistant 700-900 degree C for long time.  Flexible metal hose Thermosleeve , made by fiberglass and acrylic, thickness 1 mm, resistant 538 degree C.

Flexible Anti-abrasion Hydraulic Hose Sleeves protects hose from abrasion and allows bundling of hose lines.  There is three kinds of materials Nylon hose sleeve Polyester hose sleeve Polypropylene hose sleeve Be sure to heat the cut edges of the sleeve. When selecting Anti-abrasion Hydraulic Hose Sleeves, be sure to measure the outside diameter of your hose and add aproximately 1/4."  There is many different sizes, flat width from 15mm to 250 mm.  More anti-abrasion hydraulic hose sleeves information please contact us.

Hose sleeve and hose protector is a great investment to protect your equipment and extend the life of your industrial hoses. Hose sleeve, hose wrap, and hose protectors reduce wear, prevent abrasion, protect your hoses and cables from friction and high temperature, and shield them from potential damage. Hose sleeves are easy to install and available in a wide-range of sizes for your specific application. No matter the environment or application, we’ve got the type of hose protection sleeve you need: MSHA nylon hose sleeve, made by nylon fiber Nylon hose sleeve, made by nylon fiber Polyester hose sleeve, made by polyester fiber PP protective sleeve, made by PP fiber Nylon protective sleeve with velcro, made by nylon fiber with coating Fire Sleeve, made by silicone and fiberglass Fire sleeve with velcro, made by silicone and fiberglass Fiberglass hose protector sleeve, made by fiberglass More Hose Sleeves and Hose Protectors information please contact us.

Tempguard Fire Sleeve Hose Guard also named firesleeve or pyro- jacket, it is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. Made of braided fiberglass yarns in a flexible substrate, it is then coated with high grade silicone rubber. Resistant to hydraulic fluids, lubricating oils, and fuels, Firesleeve insulates against energy loss in piping and hosing, protects employees from burns and allows “bundling” of wires, hoses, and cables. The thick formulation of silicone rubber sheds molten splash, slag, welding splatter, electrical or grinding sparks and contamination. It also provides protection from ozone, UV etc. Mining is one of the most dangerous industries with the harsh working conditions underground, where explosion and fire outbreak are two of the major mining accidents, which would cause sever disasters and threaten the life of miners and destroy the equipment. Our fire sleeve pass the MSHA test, the result as below,  As a leading manufacturer for fire sleeve hose guard, we also make DN 45545-2 and DIN 5510-2 certificates. Our firesleeve is realiable.