APK warm air ducting tube is for warm air and is often used for heater inlets and outlets. It is bendable and pliable, and can be cut to order by metre. It is standard for installations in boats and caravans.
This paper aluminum air duct hose is made by paper/aluminium/paper laminated ducting, Easily cut with a sharp knife. Maximum operating temperature 120°c. The paper material have standard grade, also have fire resistant grade.
Titanium Spark Plug Wire Boot Protectors are made from a unique high-temp basalt material, so they are very flexible. The heat sheilds is made by braided style expand and stretch, making it easy to install over straight, 90-degree, or 135-degree boots.
Hi-temp Heat Shrink Tube is a shrinkable plastic tube used to insulate wires, providing abrasion resistance and environmental protection for stranded and solid wire conductors, connections, joints and terminals in electrical work.
Titanium Exhaust Heat Wrap is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. There is different weave style, you can see details as follows.
Split Aluminized Fiberglass Tube with Adhesive Strip is designed for ease of installation when component disassembly isn’t practical. Just wrap the pre-formed, split flexible tube around any component and seal the sides with the high temperature adhesive strip to provide protection from hot pipes and engine components.
SALFS aluminized fiberglass sleeve with snap or buttom is a fabric aluminum fiberglass sleeve with stainless steel buttom, a highly polished aluminum foil is calendared under high pressure and with an adhesive onto a high temperature fiberglass base fabric.
SEALFS sewn type Aluminum Coated Fiberglass Heat Reflective Sleeve is a fabric sewn aluminized fiberglass sleeve, a highly polished aluminum foil is calendared under high pressure and with an adhesive onto a high temperature fiberglass base fabric. That fabric is slit into an tape, which is then sewn into a sleeve.
Polypropylene Textile Protection Sheaths are made of high toughness textile fiber and provide excellent resistance to abrasion. Hose protection woven abrasion sleeve is especially suitable for hydraulics and pneumatics for the containment of single and multiple hoses. These sheaths have excellent resistance to mechanical stress.
français
Deutsch
русский
italiano
español
português
Nederlands
العربية
日本語
한국의
Türkçe
Polski
Tiếng Việt
slovenský
Indonesia
